Skip to Content
By category By brandBy app
Advanced Ink & Toner
Online and phone orders only Installation available Our own certified technicians 20+ years of experience Need advice? +357 26 101001
  1. Home
  2. Printing & Office
  3. 3D Printing
  4. Anycubic 3D Printer Kobra S1 Combo Multicolor With Ace Pro Filament Box with Drying Capability
  5. 3D Printing
Pricelist: Default Pricelist
Pricelist: Default Pricelist

Anycubic 3D Printer Kobra S1 Combo Multicolor With Ace Pro Filament Box with Drying Capability

Fully enclosed CoreXY 3D printer with ACE Pro multicolour unit — 600 mm/s, 320 °C hotend, AI camera monitoring and 4 colours out of the box (up to 8).

Build volume
250³ mm
Speed
Up to 600 mm/s
Colours
4, up to 8
Filaments
PLA · PETG · ABS · ASA · TPU
489.00 € 489.00 €
410.92 €
  • Brand
  • Colour
  • Power Rating
  • Printer Technology
  • Auto Bed Leveling
  • Build Volume
  • Layer Resolution
  • Print Speed
  • Enclosed
  • Weight
  • Height
  • Manufacturer
  • Machine Dimensions
  • Machine Weight
  • Width
  • App
  • Maximum Drying Temperature
  • Compatible Spool Sizes
  • Length (Depth)
Contact Us
 ​

The Anycubic Kobra S1 Combo pairs a fully enclosed CoreXY 3D printer with the ACE Pro multicolour unit. It prints at up to 600 mm/s, reaches 320 °C at the nozzle for engineering filaments such as ABS and ASA, and watches every job with a built-in AI camera — a fast, quiet and dependable printer for home, office and workshop.

Build volume
250 × 250 × 250 mm
Max speed
600 mm/s
Colours
4, up to 8
Nozzle
Up to 320 °C
Noise
From 44 dB

Main features

Kobra S1 CoreXY frame
CoreXY construction

Stable, precise and fast

A rigid CoreXY frame with dual motor drive and Kobra OS keeps vibration low, so the print head stays responsive and accurate even at high speed. Resonance compensation and flow calibration are built in.

Kobra S1 high-speed printing
600 mm/s

Ultra-fast printing

Print at a recommended 300 mm/s and up to 600 mm/s, with acceleration up to 20,000 mm/s². Large models that used to take a day are finished in a fraction of the time.

Kobra S1 enclosed build chamber
Multicolour with ACE Pro

4 colours out of the box, up to 8

The included ACE Pro feeds four filaments for multicolour and multi-material prints, and keeps them dry while you print. Add a second ACE Pro to print with up to eight colours.

Filaments for Kobra S1
320 °C hotend · 120 °C bed

All mainstream filaments

PLA for detail and colour, PETG for strength, ABS and ASA for outdoor and heat-resistant parts, and TPU 95A for flexible prints (TPU is fed directly to the printer, not through the ACE Pro). The enclosed chamber helps ABS and ASA print without warping.

Kobra S1 cooling system
1+1+1 cooling

Crisp details, clean overhangs

Three cooling fans work together to set each layer instantly, giving sharper detail and better overhangs at high speed.

Model printed on the Kobra S1
AI monitoring

A printer that watches itself

The built-in camera spots failed prints such as spaghetti and alerts you, belt tension and foreign objects on the bed are checked automatically, and after a power cut the job resumes where it stopped.

Easy to live with

  • LeviQ 3.0 automatic bed levelling and Z-offset — no manual adjustment.
  • 4.3" touchscreen that works like a smartphone.
  • Quiet mode as low as 44 dB.
  • Ready to print in about 15 minutes out of the box.
  • Anycubic Slicer Next with ready-made profiles, LAN mode for privacy, and the Anycubic app for remote printing, monitoring and timelapse videos.
  • Thousands of free models on Makeronline, Anycubic’s model library.

Specifications

Printing
TechnologyFDM, CoreXY, fully enclosed
Build volume250 × 250 × 250 mm
Print speed300 mm/s recommended, 600 mm/s max
Acceleration10,000 mm/s² recommended, 20,000 mm/s² max
Multicolour4 colours with ACE Pro, up to 8 with two
Extruder & bed
ExtrusionShort-distance (direct)
NozzleMax 320 °C, 0.4 mm standard (0.25 / 0.6 / 0.8 mm optional)
Heated bedMax 120 °C, PEI spring-steel plate
FilamentsPLA, PETG, ABS, ASA, TPU 95A
Smart features
LevellingLeviQ 3.0 automatic, Z-offset
CameraBuilt-in HD camera, AI failure detection
SafetyPower-loss resume, filament run-out and tangle detection
FirmwareKobra OS
General
BrandAnycubic
ModelKobra S1 Combo (with ACE Pro)
Screen4.3" capacitive touchscreen
Printing fromPrinter, Anycubic Slicer Next, Anycubic app, USB
Noise≤46 dB standard, ≤44 dB quiet mode
Printer weight18 kg
Anycubic
Control it from your phone
Set up and manage it with the free Anycubic app: start and monitor prints remotely, live camera and model library.

Description

The Anycubic Kobra S1 Combo pairs a fully enclosed CoreXY 3D printer with the ACE Pro multicolour unit. It prints at up to 600 mm/s, reaches 320 °C at the nozzle for engineering filaments such as ABS and ASA, and watches every job with a built-in AI camera — a fast, quiet and dependable printer for home, office and workshop.

Build volume
250 × 250 × 250 mm
Max speed
600 mm/s
Colours
4, up to 8
Nozzle
Up to 320 °C
Noise
From 44 dB

Main features

Kobra S1 CoreXY frame
CoreXY construction

Stable, precise and fast

A rigid CoreXY frame with dual motor drive and Kobra OS keeps vibration low, so the print head stays responsive and accurate even at high speed. Resonance compensation and flow calibration are built in.

Kobra S1 high-speed printing
600 mm/s

Ultra-fast printing

Print at a recommended 300 mm/s and up to 600 mm/s, with acceleration up to 20,000 mm/s². Large models that used to take a day are finished in a fraction of the time.

Kobra S1 enclosed build chamber
Multicolour with ACE Pro

4 colours out of the box, up to 8

The included ACE Pro feeds four filaments for multicolour and multi-material prints, and keeps them dry while you print. Add a second ACE Pro to print with up to eight colours.

Filaments for Kobra S1
320 °C hotend · 120 °C bed

All mainstream filaments

PLA for detail and colour, PETG for strength, ABS and ASA for outdoor and heat-resistant parts, and TPU 95A for flexible prints (TPU is fed directly to the printer, not through the ACE Pro). The enclosed chamber helps ABS and ASA print without warping.

Kobra S1 cooling system
1+1+1 cooling

Crisp details, clean overhangs

Three cooling fans work together to set each layer instantly, giving sharper detail and better overhangs at high speed.

Model printed on the Kobra S1
AI monitoring

A printer that watches itself

The built-in camera spots failed prints such as spaghetti and alerts you, belt tension and foreign objects on the bed are checked automatically, and after a power cut the job resumes where it stopped.

Easy to live with

  • LeviQ 3.0 automatic bed levelling and Z-offset — no manual adjustment.
  • 4.3" touchscreen that works like a smartphone.
  • Quiet mode as low as 44 dB.
  • Ready to print in about 15 minutes out of the box.
  • Anycubic Slicer Next with ready-made profiles, LAN mode for privacy, and the Anycubic app for remote printing, monitoring and timelapse videos.
  • Thousands of free models on Makeronline, Anycubic’s model library.

Specifications

Printing
TechnologyFDM, CoreXY, fully enclosed
Build volume250 × 250 × 250 mm
Print speed300 mm/s recommended, 600 mm/s max
Acceleration10,000 mm/s² recommended, 20,000 mm/s² max
Multicolour4 colours with ACE Pro, up to 8 with two
Extruder & bed
ExtrusionShort-distance (direct)
NozzleMax 320 °C, 0.4 mm standard (0.25 / 0.6 / 0.8 mm optional)
Heated bedMax 120 °C, PEI spring-steel plate
FilamentsPLA, PETG, ABS, ASA, TPU 95A
Smart features
LevellingLeviQ 3.0 automatic, Z-offset
CameraBuilt-in HD camera, AI failure detection
SafetyPower-loss resume, filament run-out and tangle detection
FirmwareKobra OS
General
BrandAnycubic
ModelKobra S1 Combo (with ACE Pro)
Screen4.3" capacitive touchscreen
Printing fromPrinter, Anycubic Slicer Next, Anycubic app, USB
Noise≤46 dB standard, ≤44 dB quiet mode
Printer weight18 kg