100V Amplifiers – TrendNet Security Ltd

Adastra RS120 120W 100V Slave Amplifier 953.120UK

george — Fri, 05 Jun 2026 04:11:26 +0000

High power 100V line slave amplifiers in a 2U rack-mountable housing. Slave inputs can be connected from Adastra RM series mixer amplifiers and slave outputs onto further RS slaves. Master volume control governs output level to either low impedance or 100V speakers. Designed to power medium to large installations from a mixer output or expand existing systems.

Features

RCA slave inputs and outputs
8 ohms and 100V line speaker output
Peak and signal LEDs
2U 19" rack mountable
Supplied with rack-mount ears

Adastra RM244V v2 4Z 240W FM/USB/BT with Paging 953.244UK

george — Fri, 05 Jun 2026 03:58:59 +0000

240W mixer-amplifier with 3 mic/line inputs, 1 aux input and a built-in media player. Connections for mic/line inputs are jack or XLR and channel 1 input has a variable mute for priority override. 24V contacts can be connected to a fire alarm panel for emergency evacuation if required. The media section can provide playback from Bluetooth, USB/SD media or an FM tuner. Output terminals are provided for 4 zones which share the output of the 240W amplifier, governed by 4 individual rotary volume switches on the front panel. RJ45 inputs on the rear panel allow connection for up to two CS4 call stations to enable paging to individual or all zones. The RM244V offers versatile 4-zone control without the expense of a quad amplifier and can even be operated as the front end to an expanded public address system.

Built-in USB/SD player with Bluetooth and FM tuner
Compatible with CS4 call station (953.146UK)
4 individual volume attenuators
Switchable +20V phantom power
Send/return loop for connection to audio processors or amplifiers
Supplied with 19" rack-mount ears (2U)

Adastra RM1202 v2 100V Amp 2x120W FM/USB/BT 953.163UK

george — Fri, 05 Jun 2026 03:48:34 +0000

Mixer-amplifier with 2 separate 120W outputs to 100V or 4/8 Ohms speakers. Inputs for mic, 2 x mic/line and 2 line inputs with an integral USB/SD/FM player and Bluetooth receiver can be enabled independently to either of the 2 zones. Mic 1 channel has a variable override and switchable phantom power for use with condenser microphones. Designed for installations where independent paging and audio to 2 separate zones is needed.

Integral USB/SD/FM audio player
Bluetooth with programmable ID
100V or 4/8 Ohms operation
Can be configured as a stereo 100V amplifier
5 input channels
Switchable +20V phantom power
Switchable priority for channel 1

Adastra RS360 360W 100V Slave Amplifier 953.122UK

george — Fri, 05 Jun 2026 03:46:23 +0000

High power 100V line slave amplifier in a 2U rack-mountable housing. Slave inputs can be connected from Adastra RM series mixer amplifiers and slave outputs onto further RS slaves. Master volume control governs output level to either low impedance or 100V speakers. Designed to power medium to large installations from a mixer output or expand existing systems.

RCA slave inputs and outputs
8 ohms and 100V line speaker output
Peak and signal LEDs
2U 19" rack mountable
Supplied with rack-mount ears

Adastra UM60 100V Compact Amp 60W 953.176UK

george — Fri, 05 Jun 2026 03:40:30 +0000

100V mixer-amplifier with USB audio player, FM tuner and BT wireless receiver in an ultra compact housing. Microphone input, line input and USB/FM/BT sections are governed by front panel volume controls and a master volume. Mono output to either 100V line or 8 Ohms speaker load is connected via screw terminals on the rear panel. Supplied with hardware for mounting 2 units side by side in a 1U 19" rack space. Designed as a versatile solution for small to medium PA installations.

Ultra compact form factor
Efficient class D amplifier design
Internal USB/FM/BT audio player
100V line or 8 Ohms operation

The box for this item contains :

UM series compact 100V amplifier
IEC power lead(s)
Rack-mounting hardware

Adastra Touch Wall Plate for RZ45 Matrix 953.050UK

george — Fri, 05 Jun 2026 03:37:26 +0000

Remote control for the RZ45 audio matrix system built into a single gang 86 x 86mm wall plate. The illuminated acrylic touch-operated surface selects between 3 stereo audio sources or the inbuilt media player on the RZ45 and controls the output level to its zone. Connection by standard network cable carries signal and power to the TR86 panel up to 100m away from the RZ45 or signal up to 1km away with a separate 24Vdc power input. Additionally, a mono line level signal can be wired internally to the panel via screw terminals to provide an independent local audio source. Up to 5 TR86 remote panels may be used with a single RZ45 unit controlling up to 5 independent zones.

Hygienic acrylic touch operated surface
Illuminated with colour coded indicators
Easy installation via RJ45 connection
Up to 5 remote panels per RZ45 audio matrix
Up to 100m powered directly from RZ45 or 1km with +24V power

The box for this item contains:

TR86 remote control wall plate

Adastra RM406 Mixer-Amp 100V 6x40W 953.160UK

george — Fri, 05 Jun 2026 03:01:46 +0000

Zone mixer-amplifier with 6 x 40W class D power section for 100V or 4/8 Ohms speakers. Each zone can be monitored from the front panel via a headphone output with volume control. 3 mic/line inputs, 1 aux input and an integral USB/SD/FM player with Bluetooth receiver can be matrix switched to any of the 6 zones independently. Mic 1 channel has a variable override and each microphone input has switchable phantom power. A master chime with volume can be used for paging calls and alerts. Designed for multi-room systems requiring different audio sources.

Integral USB/SD/FM audio player
Internal Bluetooth receiver
100V or 4/8 Ohms operation
6 independent output zones
3 mic/line and 1 auxiliary input
Mic priority and chime functions
Switchable +20V phantom power
24V mute contacts
Monitor headphones output

Adastra RS480 100V Slave Amplifier 480W 953.123UK

george — Fri, 05 Jun 2026 02:44:51 +0000

Power supply: 110/240Vac, 50/60Hz (IEC)
Input: RCA slave in
Output signal :2 x RCA
Outputs speaker: 100V and 8 ohms
Controls: Master volume
THD: <1.0%
DC power: N/A
Power output: 480W rms
Dimensions: 433 x 345 x 89mm
Weight: 13.50kg

Adastra RMS1202 100V 2x120W Class D Amplifier 953.154UK

george — Fri, 05 Jun 2026 02:15:29 +0000

Multi-channel 100V slave amplifier with independent outputs for 100V or 4-16 Ohm speakers. Each amplifier channel has its own independent line input, which can be switched to a global auxiliary, providing the option of the same input to several of the amplifier channels if required. A paging microphone input is provided for voice alerts and a 24V mute terminal can be connected to an alarm panel for emergency evacuation override. Class D circuit design and efficient toroidal transformers have enabled a design which fits into a 1U rack-mount housing. The RMS-series amplifiers can be applied as high power slave units or equally as a fully independent zoning system for a multi-room installation.

Independent high efficiency class-D amplifiers
Outputs for 100V or 4-16 Ohm speakers
Separate channel inputs and optional global aux input
Paging microphone input with vox override
Switchable +20V phantom power for paging microphone
24V contacts for emergency muting

Adastra RMS605 100V 5x60W Class D Amplifier 953.152UK

george — Fri, 05 Jun 2026 02:15:26 +0000

RMS-series Multi Zone 100V Amplifiers
Multi-channel 100V slave amplifier with independent outputs for 100V or 4-16 Ohm speakers. Each amplifier channel has its own independent line input, which can be switched to a global auxiliary, providing the option of the same input to several of the amplifier channels if required. A paging microphone input is provided for voice alerts and a 24V mute terminal can be connected to an alarm panel for emergency evacuation override. Class D circuit design and efficient toroidal transformers have enabled a design which fits into a 1U rack-mount housing. The RMS-series amplifiers can be applied as high power slave units or equally as a fully independent zoning system for a multi-room installation.

Independent high efficiency class-D amplifiers
Outputs for 100V or 4-16 Ohm speakers
Separate channel inputs and optional global aux input
Paging microphone input with vox override
Switchable +20V phantom power for paging microphone
24V contacts for emergency muting